With the use of the elevator more and more common, elevator decoration also in the industry quickly rise, to provide effective help for more demand, but whether it is in the process of operating the elevator, or in the process of elevator decoration, we need to have a detailed understanding of it, and to know what needs to be noted, next we look at the details.

Elevator use precautions.
1 Maintenance operation
In the process of maintenance, if the slow running, the number of people is usually not less than two people, but also pay attention to safety, especially in the car above the operation; overhaul the car top, to close all the outer hall after the slow running.

When the villa elevator runs slowly to the set position, if it is necessary to use the electrical and mechanical parts for maintenance, the professional operator should cut off the emergency stop switch on the top access box or cut off the emergency stop button on the car control panel before operation.

2 Operation under dangerous condition
If the elevator is out of control and the safety clamp has not yet played a role, people inside the elevator should remain calm and use all communication equipment to notify the outside maintenance personnel; if an earthquake occurs, the elevator should immediately stop running near the floor, and if a fire occurs, the elevator should be opened to a safe floor quickly, and then let the people inside the elevator leave safely, and after all the people have evacuated, the power supply of the elevator should be cut off and the hall door of each floor should be closed. After all the people have evacuated, cut off the power of the elevator and close the doors of the hall on each floor.

If the elevator is out of control, immediately press the emergency stop button, the elevator inside the personnel can not open the door to jump out, in case of danger.





Elevator decoration precautions.
1 Construction environment precautions
To check the roof beam low side and side and opposite wall to see if there is in a plane, to see the leveling layer of the leveling, in the internal line groove after the completion of threading, to be timely acceptance if the use of iron parts, to rust prevention treatment to prevent rust.

2 Elevator room wall tile attention
To construction according to the decorative drawings, control the standard height of the bottom of the wall tiles; paste the wall tiles before, to check the wall, see if there is no bulging, if there is to immediately deal with, but also through the line to find the gauge, maintain good straightness and verticality, paste the wall tiles before also wet the wall, to avoid drying the wall and the emergence of bulging off the situation, but also coated with paste mortar, pay attention to full.

The above is for the elevator decoration to make the relevant introduction, in fact, each industry has the rules of each industry, the decoration industry is no exception, you choose to decorate the elevator, you must find a professional decoration company, and also have an understanding of the industry, so as to well ensure that their decorative effect.