English
عربPeople's living standards continue to improve. When the home elevator was first installed, the home elevator was a small furniture installed in the home, which had high requirements for the installation environment. The quality of the installation determines the use status and service life of the home elevator, so residential areas Before installing the elevator, the owner must clearly and strictly abide by the elevator installation standards.
The installation standards for small home elevators have the following 6 points
1. The indoor space of the elevator shaft that runs vertically across the entire line.
According to different installation places, home elevators can be installed in the middle of indoor stairs, elevator shafts, walls and other places of civil engineering works. No matter where they are installed, there must be a vertical and full-line indoor space. Pay special attention when installing small household elevators on laser-cut concrete floors. In many cases, the communication between the owner of the residential area and the engineering construction team is not very good. It is easy to happen that the specifications of the laser cut holes in each building are the same, but the vertical indoor space is not completely penetrated. Small household elevators cannot be installed. Secondary engineering construction is required. Consume human resources.
2. Buried enough pits for elevator installation generally must be buried in pits.
Eside home elevators can be installed not only in the environment of traditional villas, but also in high-rise residential complex buildings and other environments where the pit cannot be analyzed in depth, and the installation is convenient.
3. Landfill sufficient high-rise aspect ratio.
Due to safety considerations and the structure of the home elevator itself, the installation of the elevator must fill up enough high-rise indoor space with an aspect ratio. The minimum high-rise aspect ratio of Eside Home Elevator can guarantee 2600 mm.
4. Clarify the location of switching power supply and its wiring.
Small family elevators have different requirements from owners in various regions, different communication base stations, different structures, and different switching power supply locations.
5. As a small and medium-sized electrical product in the basic decoration work of the home, care must be taken to avoid smoke and dust pollution during the whole process of installation and daily maintenance.
If a home elevator has been installed before the house renovation, a lot of smoke and dust generated during the renovation process will enter the home elevator. On the other hand, it is difficult to remove. More importantly, the fine smoke and dust will enter the elevator structure and interfere with the normal operation of the home elevator. The use period of the home elevator. Therefore, the installation of small villa elevators must be carried out after interior decoration.
6. Complete communication with the manufacturer, installation team, and interior decoration company. Installation determines the operating status and service life of the small home elevator. Therefore, you must communicate with the manufacturer, the elite team and the interior decoration company before installation to determine all the points and do Get ready for elevator installation. If necessary, you can communicate with the decoration company immediately to facilitate the boss and save time and peace of mind.
